TPI 133 DMM Multimeter

Large easy to read display in full size DMM; 1,000 DC volts and 750 AC volts; 0.5% DCV basic accuracy

• Large easy to read 2,000 count display
  
• 0.5% DCV basic accuracy
  
• 0 to 750 ACV; max resolution 1mV
  
• 0 to 1,000 DCV; max resolution 0.1mV
  
• 0 to 20M; max resolution 0.1
  
• 0 to 10 amps AC/DC; max resolution 0.1uA
  
• Data hold
• cULus 61010-1
• CAT II - 1000V, CAT III - 600V
• 3 Year Limited Warranty

Specifications:

• DC Volts/Amps:
• Maximum Input: 1000V / 10A
• Maximum Resolution: 0.1mV / 0.1 A
• Accuracy: +/-0.5%
  
• AC Volts/Amps:
• Maximum Input: 750V / 10A
• Maximum Resolution: 0.01mV / 0.1A
• Accuracy: +/- 0.8% / +/-1%
• Resistance (Ohms):
• Maximum Input: 20M
• Maximum Resolution: 0.1
• Accuracy: +/-0.5%
• Continuity: Audible at less than 100
• Diode: 2.5V at 1mA maximum output
• Data Hold
• Protective Boot
• Display Type: 2000 count LCD
• Range Selection: Manual
• Operating Temperature: 32F - 104F (0C - 40C)
• Storage Temperature: 14F - 122F (-10C - 50C)
• Humidity: 80% non-condensing
• Size: 7.4" x 3.4" x 1.2" (187mm x 86mm x 33mm) with boot
• Battery Type: 9V Alkaline (NEDA 1604)
• Battery Life: 500hrs
• Overvoltage Category: CAT III 600V
• Agency Approval: cULus 61010-1, IEC 61010-1
• Warranty: 3 Years
  

Applications:
Digital Multimeter TECH Tips

Category Ratings

• Category I: Usually electronic equipment or equipment where measures have been taken to limit transient over voltages.
• Category II: Single phase loads like appliance personal computers, television sets, and other household loads. Outlets located more than 30 feet from a CAT III source or more than 60 feet from a CAT IV source.
• Category III: Distribution level fixed installations like distribution panel devices, short branch and feeder circuits, three phase loads, and single phase commercial lighting.
• Category IV: Equipment and lines located on the power line side of a service panel or where a low voltage connection is made to utility power.