|
Grundfos 98052760 MAGNA 32-100 F N Circulation Pump
|
Item Number: 98052760
Manufacturer Name: Grundfos
Manufacturer Part No: MAGNA32100FN
* Whole number only
|
|
Brochure & Specification Sheet MAGNA 32-100 F N
The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing The pumped liquid lubricates the bearings In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible A pump with no maintenance requirements and extremely low Life Cycle Cost The pump is characterized by:
- Electronically Commutated Motor (ECM) with permanent magnet rotor
- Pump controller integrated in the terminal box
- Ceramic radial bearings
- Carbon axial bearing
- Stainless steel rotor can, bearing plate and rotor cladding
- Aluminium alloy stator housing
- Stainless steel pump housing
- Protected against overload
|
|
The pump is a single-phased. The motor does not require external motor protection
Grundfos MAGNA - part of Series 2000 pumps - feature automatic control of differential pressure through adaptation of pump performance to actual heat requirement without the need for connection of external components Four control modes are available:
- AUTO mode (self-regulating from "one proportional pressure curve to another") to optimise comfort and reduce energy consumption to a minimum
- Proportional pressure
- Constant pressure
- Constant curve (available through external communication only)
|
|
The pump can communicate through
- Integrated clip-on optional LONWorks module
- Integrated clip-on optional GENIbus module
- Handheld remote control R-100 (separate Grundfos product)
- Integrated alarm signal
- Integrated start /stop signal
|
|
| Product name |
MAGNA 32-100 F N |
| Product No. |
98052760 |
| EAN |
5710628158155 |
| Price |
|
Technical
| Head max |
32.81 ft |
| TF class |
110 |
| Approvals |
CETLUS |
| Model |
F |
Materials
| Pump housing |
Stainless steel |
|
DIN W.-Nr. 1.4308 |
|
AISI CF8 |
| Impeller |
Stainless steel |
|
DIN W.-Nr. 1.4301 |
|
AISI 304 |
Installation
| Range of ambient temperature |
32 .. 104 °F |
| Maximum operating pressure |
203.05 psi |
| Flange standard |
GF 15/26 |
| Pipe connection |
1.25" |
| Pressure stage |
200 PSI |
| Port-to-port length |
6 1/2 mm |
Liquid
| Pumped liquid |
Water |
| Liquid max temp |
201.2 °F |
| Selected liquid temperature |
140 °F |
| Density |
61.35 lb/ft³ |
Electrical data
| Power input - P1 |
10 .. 180 W |
| Main frequency |
60 Hz |
| Rated voltage |
1 x 208-230 V |
| Maximum current consumption |
0.1 .. 1.23 A |
| Enclosure class (IEC 34-5) |
X4D |
| Insulation class (IEC 85) |
F |
Others
| Net weight |
12.6 lb |
| Gross weight |
13.2 lb |
| Shipping volume |
0.42 ft³ |
| Energy label |
A |
|
Product Reviews
|
|
|