|
Grundfos 98071395 MAGNA 32-60 F Circulation Pump
|
Item Number: 98071395
Manufacturer Name: Grundfos
Manufacturer Part No: 98071395
* Whole number only
|
|
Brochure & Specification Sheets MAGNA 32-60 F
The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The pumped liquid lubricates the bearings. In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible. A pump with no maintenance requirements and extremely low Life Cycle Cost. The pump is characterized by:
- Electronically Commutated Motor (ECM) with permanent magnet rotor
- Integrated Pump Controller
- Ceramic radial bearings
- Carbon axial bearing
- Stainless steel rotor can, bearing plate and rotor cladding
- Aluminium alloy stator housing
- Cast iron pump housing
- Protected against overload
|
|
The pump is single phase The motor does not require external motor protection
Grundfos MAGNA - part of Series 2000 pumps - feature automatic control of differential pressure through adaptation of pump performance to actual heat requirement without the need for connection of external components 4 control modes are available:
- AUTOADAPT (self-regulating from "one proportional pressure curve to another") to optimize comfort and reduce energy consumption to a minimum
- Proportional pressure
- Constant pressure
- Constant curve (available through external communication only)
|
|
The pump can communicate via an
- Integrated clip-on optional Relay module (start/stop signal, alarm/feed-back signal)
- Integrated clip-on optional GENIbus module (start/stop signal, alarm/feed-back signal, 0-10 V analog input, control of twin-head pumps, and external forced control via inputs for Max. curve and Min. curve)
- Handheld remote control R100 (separate Grundfos product)
|
|
| Product name |
MAGNA 32-60 F |
| Product No. |
98071395 |
| EAN |
5710628443879 |
| Price |
|
Technical
| Head max |
19.69 ft |
| TF class |
110 |
| Approvals |
CETLUS |
| Model |
F |
Materials
| Pump housing |
Cast iron |
|
EN-GJL250 |
|
AISI A48 CL35 |
| Impeller |
Stainless steel |
|
DIN W.-Nr. 1.4301 |
|
AISI 304 |
Installation
| Range of ambient temperature |
32 .. 104 °F |
| Maximum operating pressure |
203.05 psi |
| Flange standard |
GF 15/26 |
| Pipe connection |
1.25" |
| Pressure stage |
200 PSI |
| Port-to-port length |
6 1/2 mm |
Liquid
| Pumped liquid |
Water |
| Liquid max temp |
201.2 °F |
| Selected liquid temperature |
140 °F |
| Density |
61.35 lb/ft³ |
Electrical data
| Power input - P1 |
10 .. 85 W |
| Main frequency |
60 Hz |
| Rated voltage |
1 x 208-230 V |
| Maximum current consumption |
0.1 .. 1.23 A |
| Enclosure class (IEC 34-5) |
X4D |
| Insulation class (IEC 85) |
F |
Others
| Net weight |
12.6 lb |
| Gross weight |
13.2 lb |
| Shipping volume |
0.42 ft³ |
| Energy label |
A |
|
Product Reviews
|
|
|