Replacement Inspection Port assembly for all HI/MX Models
|
Quad ring is used on the Nozzle of all FI/HI/MX Models.
|
Large O Ring used in the Combu Primary strainer all models.
|
Coupler used on all pump assemblies on all Models except those using a J Pump.
|
Required with DuraTech flashing to create a weather-proof penetration through the roof deck.
|
Lighted Switch used to control the preheater circuit on all FI/HI/MX Models.
|
Required with DuraTech flashing to create a weather-proof penetration through the roof deck
|
Coupler used to connect J-Pump to Pump motor. All models with J Pump.
|
For Indoor use only. Requires 18" clearance to a combustible.
|
For Indoor use only. Requires 18" clearance to a combustible.
|
Use to adapt DuraBlack pipe to ceiling support box or finishing collar. Adds 3” - 13” of length to rigid pipe.
|
Use to adapt DuraBlack pipe to ceiling support box or finishing collar.
|
Integrated collar with adapter, fits into the female end of the chimney pipe to provide a decorative black finish.
|
Provides connection to DuraBlack.
|
Lanair 8981 Cad Cell for CA/FI/HI/MX
|
|
|
Lanair 8662 Check Valve for 80 & 215 Gallon Oil Tanks
|
Used at the bottom of a vertical run for clean out.
|
Strainer Element used in all Combu Primary Strainers on all Models. Washable
|
One piece ignitor and bracket for all FI/HI/MX models.
|
Designed to support the DuraTech Chimney and allows the chimney to pass through the roof and extend down from the ceiling.
|
Use to weather proof the penetration of chimney pipe through the roof.
|
Replacement Nozzle and Quad Ring for Models HI140/240/320/ MX/MXB250 only.
|
Required where pipe terminates above the roof line
|
|
|
Adjustable to different roof pitches.
|
Used at the bottom of a vertical run for clean out.
|
Use to weather proof the penetration of chimney pipe through the roof.
|
Replacement Turbulator for all FI/HI/MX Models.
|
Secondary Air Regulator including Gauge used on all Models.
|