SpacePak AC-WPAK-60 WaterPak 4 Row Hot Water Coil

Product Data Sheet

The SpacePak Model WPAK Hydronic Heating coil is designed for use with both SpacePak horizontal and vertical fan coil unit models equipped with refrigerant type coils ("ESP" Models). The unit mounts to the inlet of the Fan Coil Unit and requires installation of a SpacePak return air duct adaptor for V-Series units only. J-Series units are factory supplied with a removable, return air panel used in lieu of the adaptor. The coil is equipped with a purge plug to remove air trapped in the piping system and a drain plug to remove the water for maintenance or extended shut downs. The plugs are conveniently located so they can be removed without removing any panels. Use the chart below to match the proper Hydronic Coil with the SpacePak Fan Coil Unit.

• 60,000 BTUH (Nominal)
• BtuH Capacity @ 6GPM 200F: 2,430
• Volts: 208/230
• Water Conn. Inlet: 5/8"
• Water Conn. Outlet: 5/8";

Width: 24" Height: 14" Depth: 8-3/4";

STANDARD HYDRONIC COIL FEATURES
• High-output 4 row coil.
• Easily mounts directly to all SpacePak fan coil units.
• 5/8" copper connections.
• Coils encased in a sheet metal cabinet.