American Standard High Efficiency Gas Water Heaters

• THERMAL EFFICIENCY UP TO 96% – Exceeds ASHRAE 80% requirement.
• ENERGY STAR CERTIFIED – Uses 14% to 55% less energy than equipment that meets the minimum federal standard.
• FLEXIBLE VENTING – Allows optional vertical or horizontal venting and certified for direct vent sealed combustion applications. Providing 135 equivalent feet for 3" or 4" venting and 65 equivalent feet for 2" venting with PVC, CPVC or ABS vent pipe.
• ELECTRONIC CONTROL OF IGNITION & THERMOSTAT – Provides accurate water temperature settings from 100° F to 180° F. Display panel indicates operating mode, settings and any failure modes for ease of service.
• SUBMERGED COMBUSTION CHAMBER – Minimizes radiant heat loss and improves efficiency.
• ZERO INCH CLEARANCE – To combustibles to provide additional installation flexibility.
• INNER GLASS LINED TANK – With Dura-Glas™ and fired at 1600°F for optimum protection from the effects of corrosion.
• MAGNESIUM ANODE RODS – To extend tank life.
• NON-CFC FOAM INSULATED – To save energy and reduce fuel costs by maximizing heat retention.
• FULL SIZE HAND-HOLE CLEANOUT – For convenient tank inspection and removal of sediment deposits.
• FACTORY INSTALLED ENERGY CUT-OFF SYSTEM AND TEMPERATURE & PRESSURE RELIEF VALVE.
• CSA DESIGN CERTIFIED – In accordance with ANSI Z21.10.3-CSA4.3. Meets and exceeds ASHRAE 90.1-1999.
• CEC LISTED – CSA Certified to meet NSF/ANSI 5 Standards.
• LOW NOX BURNER – Exceeds California SCAQMD, BAAQMD & state of Texas requirements.
• AMERICAN STANDARD WATER HEATERS – Gas water heaters are certified at 300 PSI test pressure and for 150 PSI working pressure.
• ALL TANKS ARE HYDROSTATICALLY TESTED.
• THREE YEAR LIMITED TANK WARRANTY – On inner glass lined tank and one year limited warranty on all other components.

Brochure