Honeywell Y8610U6006 Intermittent Pilot Control Conversion Kit (270kBtuh max)

Features

• Use with natural or LP gas
• Includes gas valve, ignition module, pilot burner hardware, ignition cable, and wiring harness
• Provides 100 percent pilot gas shutoff if pilot fails to light; after 6-minute delay, trial for ignition is repeated.
• Ignition trail/delay sequence is repeated until the appliance lights or call for heat is removed.

• Dimensions (in.): 3 15/16 in. high x 5 7/16 in. wide x 2 5/8 in. deep
• Dimensions (mm): 100 mm high x 138 mm wide x 67 mm deep
• Includes: VR8304M3558 (1/2 x 3/4; 3.5" setting; 270kBtu/hr at 1 in. p.d.)
• Electrical Ratings: 24 Vac
• Frequency: 60 Hz
• Flame Failure Response Time (sec): 2.0 sec
• PrePurge: 0 or 30 seconds
• Ambient Temperature Range (F): -40 F to +165 F
• Ambient Temperature Range (C): -40 C to +74 C
• Ignition System Type: Intermittent Pilot
• Ignition Sequence: Continuous retry, after trial for ignition, pilot gas shuts off for 5 minutes, then another trial for pilot ignition takes place
• Typical Gas Control: VR8204, VR8304
• Type of Gas: Natural or LP
• Flame Sense: Single Rod or Two Rods
• Ignition Source: Internal high voltage spark generator
• Ignition Trials To Lockout: continuous retry
• Lockout Timing: 15 or 90 seconds
• Ignition Trial Time (sec): 15 or 90 seconds
• Maximum Valve Load @ 24 Vac (Amps): 1A Pilot, 2A Main @ 24Vac
• Typical Ignition Hardware: Q345, Q3451