| | |
|
| |
| | |
|
|
Relays
Provides automatic, nonrecycling control of an intermittent ignition oil burner system.
|
Provides automatic, nonrecycling control of an intermittent ignition oil burner system.
|
Provide general purpose switching for refrigeration and air conditioning equipment, appliances, vending machines and similar applications.
|
Provide general purpose switching for refrigeration and air conditioning equipment, appliances, vending machines and similar applications.
|
Provides low voltage control of line voltage fan motors and auxiliary circuits in heating, cooling, or air conditioning systems.
|
Switching Relay provides DPST switching for hydronic zone controlled heating systems or SPST control of two seperate loads. One load must be line voltage; the other may be either line or low voltage. The R845A may be directly controlled by any 2-wire seri
|
Universal switching relay with internal transformer, two line voltage SPST relays and one low voltage SPST relay with PowerPile rating.
|
Fan and Limit Controller with 125 F fan on and 100 F fan off stops, 200 F high limit stop and 8 in. insertion
|
Provide intermediate switching of a line voltage device from a low voltage controller.
|
120 Vac Protectorelay® with 3.0 second flame failure response time and 15 second safety switch timing
|
120V Switching Relay with internal transformer, one SPST line voltage relay.
|
|
Microprocessor-based integrated primary burner control for automatically fired gas, oil, or combination fuel single burner applications. Provides level of safety, functional capability and features beyond conventional controls.
|
One or Two Rod Intermittent Pilot Control with continuous retry trial time with configurable lockout timing of 15 or 90 seconds and configurable prepurge of 30 seconds or no prepurge
|
One or Two Rod Hot Surface Ignition Control 4 or 7 second trial time and 4 or 7 second lockout timing
|
Two Rod Direct Spark Ignition Control with 4 second trial time and 4 second lock out timing
|
Universal Hot Surface Ignition Integrated Furnace Control. Controls a standard induction-type circulating fan motor.
| |
|
|
|